Dodge Ram 2500

This truck has a new owner and he was looking to have a little life put back into the paint. Scratch removal, paint correction and most of all he wanted it to shine like it did when it was new. I think we accomplished all of this with a lot of sanding, a two stage cut and polish (heavy and fine) finished with a 5 year ceramic application. Here’s the process.

  •  Decontamination wash – This service includes the full exterior, door jambs, exhaust, wheels, and wheel wells.
  • Iron fallout scrub – Iron particles (brake dust), A standard wash will not remove these bonded contaminants. A combination of chemicals are key for safe removal.
  • Clay block – Clay the paint surface to level out and remove any remaining impurities.
  • Paint correction- Wet sanding several areas. Heavy scratching on the drivers door, heavy cut polish followed by a fine cut polish to remove scratching and sand marks while increasing shine.
  • Alcohol panel wipe prep. This final wipe is to remove all remaining residues and ensures the paint is at its cleanest state prior to coating.
  • Gtechniq 5 year ceramic application
  • Supra Clear Armor windshield and glass coating added to strengthen, repel water and reduce glare.
  • Rim decontamination & degreaser to remove all chemicals and environmental contaminants.
  • Vehicle walk around and final inspection.
  • Cure time indoors for 12 hours.