2019 Ford F350. Full polish, ceramic and glass treatment was completed on this truck. It’s 4 years old, sees a pile of construction sites, equipment and extreme pulling. The surface was covered in brake dust, and because it’s white , those iron particles were very noticeable. Several paint chips and deep gouges were filled and coated. Truck looks amazing.
- Paint Correction Process
- Decontamination wash – This service includes the full exterior, door jambs, exhaust, wheels, and wheel wells.
- Iron fallout scrub – Lower body panels covered in brake dust. A standard wash will not remove these bonded contaminants. A combination of chemicals are key for safe removal.
- Clay block – Clay the paint surface to level out and remove any remaining impurities.
- Chip repair – Sand out chips, clean with alcohol, apply two coats of colour match paint, polish to shine.
- Cut and polish – Heavy cut polish to remove/diminish scratching, followed by a fine cut polish to enhance the finish to an illustrious, better than factory high gloss.
- Alcohol panel wipe – This final wipe is to remove all remaining residues ensuring the surface is at its cleanest state prior to coating.
- Gtechniq 5 year ceramic application
- Supra Clear Armor windshield and glass coating – added to strengthen, repel water and reduce glare.
- Tire decontamination – Strip, scrub and finish with a sharp, crisp, black matte that wont brown the tire.
- Vehicle walk around and final inspection
- Cure time indoors for 12 hours.
